Non Spill Water Bottle Caps Disposable lids For 18.9l Water Bottles
in Transparent White
100% food grade new PE material.
product should be full ,competely structure, surface and inside is
without apparent shrinkage, bubble, flash and defect
no dust,no platic scrap,no other impurities,no obvious ordor
logo mode & legible
Singel stick labels quality subjects to the follwing requirements.
single stick label should have right place,right colors and right
distinct printing quality with no obvious show besmirch,and no
Smooth single stick labels edge , no flash ,no silk glue.
Logo center is on the center of water cap , the deviation error
less than 2mm.
Evenly heat sealing ,without apparent ruffle,
5 Gallon caps heat sealing are strength.
No appear warped edge, no roll edge and no loose Under the
high-temperature or low temperature.
1. There is a one-time punctured flake-like lid in the middle of
2. The flake lid is punctured smoothly when the bottle is insertted
on the water dispenser. The flake lid will not drop to the water.
3. This cap is used for one time only,it is not allowed to be
reused,and may play a anti-theft protection.
4. Single-stick label sealed on the cap,perfect protection of
inside waters against outside dusts & particles.
5. The cap with foam liner,it is good sealing performance,no water
drop spilling even the bottle being lie down.
6. Beside the cap with a cap skirt, which easy to be teared during
removal from the water bottles.
7. Bottle Caps are made of All New food-grate plastic material.
8. Bottle Caps for all 55mm Neck PET,PC or PVC Bottles.
9. OEM brands are welcomed according to custom's order quantity.
10. FDA Approved by U.S.A.
All kinds of non spill 55mm cap for 3 or 5 gallon water bottles
18.9 L water bottles ;
5 Gallons water bottles ;
Mineral Water Bottles ;
Pure Water Bottles